Password Entry - ABB SM3000 User Manual

3.3 Password Entry

Enter Password
1) Select the required character using the
2) Add the selected character to the password string using the
Note. For security, all characters are displayed as ' '.
3) Repeat 1 and 2 until all characters have been entered.
4) Highlight the 'OK' button using the
Change Password
Select 'Change Password' using the
1) Highlight the Edit Button (
character entry box.
2) Enter the old password using the
button and press .
3) Enter the new password using the same procedure as for the old password.
4) Enter the new password again to confirm it.
5) Highlight the 'OK' button and press
Password change successful.
Note. If the key is pressed at any stage or 'OK' is selected before the new password
is confirmed, the password change operation is cancelled and the following message is
displayed:
Password Expired
Passwords can be configured to expire at pre-determined intervals. If a password is time-
expired, this screen is displayed automatically. Enter a new password as described above.
, , , and
, , , and
, , , and
) using the and keys and press
, , , and
.
3 SETUP...
keys.
key.
keys and press .
keys and press .
to display the
keys. Highlight the 'OK'
39