ABB SM3000 User Manual page 51

...4.1.2 Configuration Access – Figs. 4.1 and 4.2
Configuration
Configuration Level
Protected
(see Section 4.1.1)
Configuration Level
Unprotected
(see Section 4.1.1)
Check this box to
stop recording whilst
in configuration mode.
The existing security configuration parameters are retained (i.e. the
security configuration remains as currently configured) when a
configuration is opened from file or when a new configuration is
loaded. Check 'Load security configuration from file' to overwrite
the current security configuration with data from the file to be loaded
– see below.
Note 2
Notes.
1. If 'New Configuration' or 'Open a Configuration' is selected and the modified configuration file is saved later as the
current configuration, new internal data files for all enabled recording channels are created and any unarchived
data is lost.
2. The option to load or retain the security configuration is available only to the System Administrator (User 1). If a new
or existing configuration file is opened by a user other than the System Administrator, the instrument's existing
security settings are retained.
Operator 1
Operator 2
Operator 3
Operator 14
Operator 15
Enter Password (see Section 3.3)
Cancel and return
to the Operator level.
Fig. 4.1 Accessing the Configuration Level
Edit the current configuration. Changes are not implemented
until saved on exit from the Configuration level.
Open a new configuration
with the default settings
detailed in APPENDIX 3
– see below.
Note 1
4 CONFIGURATION...
Invalid Password Entered
(see Note in Fig. 3.1 on page 37)
Valid Password
Entered
Open a configuration saved
previously to internal or external
storage – see below.
Note 1
Alternatively, open one of the
QuickStart templates –
see APPENDIX 3.2.
Use the key to toggle
between internal and external
storage.
Press the key to cancel.
49