ABB SM3000 User Manual page 17

...2.3 Chart Views
Scales
Trace Select
Note. Applicable only to Vertical and Horizontal Chart views.
Select the scale(s) to be displayed in the scale bar at the top of the chart window. For digital
channels, the On and Off tags are displayed at the corresponding position on the scale bar.
A maximum of 3 scales can be selected for display at any one time.
Select 'Auto Scroll Enabled' to display the scale for each enabled channel in turn for 36
seconds in groups of 3.
Hide individual channel traces to improve chart clarity.
Select the channel trace(s) to be displayed in the chart view:
Select...
– 'Clear All' to clear all check boxes and hide all channel traces
– 'Select All' to select all configured channel traces for viewing
– individual check boxes to select that channel trace for viewing
Select 'OK' to exit.
Note. The recording of a channel's data is not affected by this operation and the
instantaneous channel values are still shown on the indicators at the top of the screen.
2 OPERATION...
15