ABB SM3000 User Manual page 61

...4.4.1 Setup
•1 A new internal data file for all the recording channels in this group is created if this parameter is changed. All historical data stored
internally for these channels is lost.
Enable or disable the process group overview display.
Note. If 'Number of groups' is set to 1, group overview is not
available.
Select 'Enable' to enable group overview.
Select 'Max and Min' and 'Alarms' to enable maximum and
minimum markers and alarms for display as required.
Select the language to be used to display standard user
prompts and menu items.
A digital signal source can be used to acknowledge active
alarms in Process Groups simultaneously. Refer to
all
APPENDIX 1 for a full list of sources available.
Enter the tag to be used to identify the instrument on
•1
configuration and audit log files.
Select the waiting time between the last key press and
activation of the screen saver.
When set to 'Enabled', the user can save an image of any
Operator screen to external archive media by pressing the
key when an Operator Menu is not open.
Notes.
• All images are saved to a folder on the archive media
named 'BMP'.
• The images are saved even if archiving is set to 'Offline'.
• If external archive media is not inserted, or is full, the
screen capture facility is disabled automatically.
4 CONFIGURATION...
59