Sample Parameters - ABB TZIDC Operating Instructions Manual

7.1.2

Sample parameters

"Change the zero position of the LCD screen from clockwise (CLOCKW) to counter-
clockwise stop (CTCLOCKW)"
Starting position: The positioner operates in mode 1.1 in the operating level.
1. Switch to the configuration level:
•
•
•
•
2. Switch to parameter group 3._:
•
•
•
3. Select parameter 3.2:
•
•
•
4. Change parameter settings:
•
42/18-84-EN
Press and hold and
Press briefly
Wait until the countdown goes from 3 to 0
Release and
is displayed
Press and hold and
Press twice briefly
is displayed
Release and
is displayed
Press and hold
Press twice briefly
is displayed
Release
Press briefly to select
TZIDC, TZIDC-110, TZIDC-120
simultaneously
simultaneously
Commissioning
33