Parameter Window "Controller General - ABB i-bus KNX Product Manual

ABB i-bus KNX
3.2.3 Parameter window
"Controller general"
© 2009 Busch-Jaeger Elektro GmbH – A Company of the ABB Group
Commissioning
Operating mode of unit
Options: - Normal operation with control function
- Ext. input, only operating and display function
The control function of the device is deactivated in the "Ext. input, only
operating and display function" setting. The device is used to
1. control another unit, such as switching on and off, setpoint input,
fan stage, °C/°F switching
2. display, such as current temperature
3. recording current temperature
All unwanted communication objects and parameters are not shown.
The user cannot see whether it is normal mode or branch.
Used control functions
Options: - Heating
- Cooling
- Heat and cool
The parameter "Used control functions" allows you to define the functionality
of the room thermostat. You can choose between "Heating" or "Cooling"
functions, or use it for both "Heat and cool". Once you have selected
a function, only the parameters and communication objects required for
that function are shown. This setting is only shown if the operating mode
of the device is set to normal mode with control function.
20