Using Your Refrigerator; Thermostat Setting Button; Defrost - Blomberg KSM 9641 XA+ Manual

4

Using your refrigerator

Thermostat setting button

The interior temperature of your ref-
rigerator changes for the following re-
asons;
• Seasonal temperatures,
• Frequent opening of the door and
leaving the door open for long
periods,
• Food put into the refrigerator
without cooling down to the room
temperature,
• The location of the refrigerator in the
room (e.g. exposing to sunlight).
• You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
• If the ambient temperature is higher
than 32°C, turn the thermostat
button to maximum position.
• If the ambient temperature is lower
than 25°C, turn the thermostat
button to minimum position.

Defrost

A) Fridge compartment
Fridge compartment performs full-
automatic defrosting. Water drops and
a frosting up to 7-8 mm can occur on
the inner rear wall of the fridge com-
partment while your refrigerator cools
down. Such formation is normal as a
result of the cooling system. The frost
formation is defrosted by performing
automatic defrosting with certain inter-
vals thanks to the automatic defrosting
system of the rear wall. User is not
required to scrape the frost or remove
the water drops.
Water resulting from the defrosting
passes from the water collection gro-
ove and flows into the evaporator
through the drain pipe and evaporates
here by itself.
Check regularly to see if the drain
pipe is clogged or not and clear it with
the stick in the hole when necessary.
Deep freezer compartment does not
perform automatic defrosting in order
to prevent decaying of the frozen food.
11
EN