9.
On the Analyzer, start the measurements (if you are collecting real-time data) or export the data you
want to capture. Be sure the select Ethernet as your export destination.
10. When the measurements or exporting is complete, select Transfer Capture Text Stop.
11. The data are now saved in the file location you specified in Step 7. When you open the file in a
spreadsheet or database program, you will need to browse to this folder in the program's Open dialog
box.
12. Exit out of HyperTerminal. You will be prompted to save the connection information. Saving the
information makes it easier to connect to the Analyzer the next time you want to capture data.
GE Analytical Instruments ©2013
Figure 85: Saving data on HyperTerminal
Figure 86: Entering the File Name
223 of 238
DLM 68100-06 EN Rev. A