Attendant Transfer Selection During Live Record - NEC Xen IPK Programming Manual

December 2004
Attendant Transfer Selection
During Live Record
General Description
This Memory Block controls the behavior of the Attendant DSS/BLF transfer while the Attendant
is engaged in a live recording operation. The call is either transferred to the DSS/BLF extension
or the voice mail box of the DSS/BLF extension. If Yes is selected, the call is transferred to the
DSS/BLF extension. If No is selected, the live record session is addressed to that DSS/BLF
extension (no transfer).
Display
Data
No.
0 8 : D S S
T I M E
Settings
LK 1 LK 2
No Yes
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK1 + LK6. Use
Press the corresponding CO/PBX line key to change the data option.
3
N
Press to write the data.
4
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
DRAFT 3
202 – Chapter 1
Setting
Data
Title
S E L Y S
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
to move cursor to the second Data No. position and press
J H

Attendant Transfer Selection During Live Record, 1-6-08

NEC Business Solutions Ltd
1-6-08
System Mode
1
Submode
6
Data No.
08
PC Programming
+ BTD
to access the Memory Block.