Figure 3-10: Communications Menu - NEC Xen IPK Programming Manual

Xen IPK
Section 7, Xen IPK Pulldown Menus
Communications
The Communications pulldown menu allows access to system data items
relating to direct and remote connections to the Xen system.
Connect
This option allows the technician to connect to the Xen system.
Connection can be Direct or Remote. Direct connection is when the
MAT PC is directly connected to the Xen system. With Remote
connection, the MAT PC uses a modem to dial into another external
remote modem that is connected to the Xen system. If the MIFM-
U( ) KTU is equipped with a socket modem (modem kit part no.
750620), then the external remote modem is not needed. For Direct
connection to the KTS, connect the serial cable included with the
MAT from a free serial port on the MAT PC to the COM 1 port on the
KTS. Select Communications, Connect. Select the Setup button to
choose PC COM port. Choose Direct Connection and click the
Connect button. For Remote connection to the KTS, choose Modem
Connection and select the Dial button. For this type of connection,
the PC must have an MNP Class 4 modem. This type of connection
allows the user to program a KTS located at a remote location.
In either case, after a successful connection is established
with the KTS, you are ready to upload and download data to and
from the KTS.
Communications Menu
Figure 3-10:
Programming Manual
DRAFT 3
Chapter 3 – 615