NEC Xen IPK Programming Manual page 58

December 2004
Programming Procedures
N
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
Related Programming
M.B. Number
1-5-25 SMDR Valid Call Timer Assignment
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
N
This timer is used for three different features with functions described below:
Elapsed Call Timer: The time needed after dialling until the Elapsed Call Timer is started and displayed on a Multiline
SMDR Start Timer: The time needed after dialling until the SMDR Valid Call Timer is started. Refer to Memory Block 1-
Lines set as "YES" in Memory Block 3-72, as having Reversal on Answer, do not follow this Memory Block.
DRAFT 3
38 – Chapter 1
(Continued)
P
to go back on-line.
Terminal.
5-25 SMDR Valid Call Timer Assignment. For outgoing calls, both timers (SMDR Start Timer and
SMDR Valid Call Timer Assignment) must elapse before a call record is generated.
Memory Block Name
NEC Business Solutions Ltd
Start Timer Selection, 1-1-05