Code Restriction Class Assignment When Lockout Is Set - NEC Xen IPK Programming Manual

Xen IPK
Code Restriction Class
Assignment when Lockout
is Set
General Description
Use this Memory Block to assign the Code Restriction Class when a station user sets the Station
Lockout or when the Attendant sets Attendant Station Lockout.
Display
Data
No.
7 0 : R E S T
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + GK
Used dial pad to enter class restriction.
3
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K I
~ to enter numeric data
N
4 Press to write selected data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
Refer to Section 6 Code Restriction in this chapter.
N
When a station is locked out, the Code Restriction Class Assignment of this Memory Block is used instead of the Code
Restriction Class assigned in Memory Block 4-07, Code Restriction Class Assignment (Day Mode) or 4-08, Code
Restriction Class Assignment (Night Mode).

1-1-70, Code Restriction Class Assignment when Lockout is Set

Title Setting
1~7 Data
C L A S S = 0 1
D I S P L A Y
to access the Memory Block.
Memory Block Name
Programming Manual
1-1-70
System Mode
1
Submode
1
Data No.
70
PC Programming
+ AC
Default Values
Class 01
DRAFT 3
Chapter 1 – 111