Analog Input Control - Mitsubishi Electric FX3G User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U
Common Items
1.1.1

Analog input control

Input the voltage/current signal from a flowmeter, pressure sensor, etc. to the PLC to monitor the condition of
the workpiece or equipment.
Output the current or voltage
data from the flux rate or the
pressure.
FX Series Analog input products
3G
• FX -2AD-BD
3G
FX Series Analog input products
3U
• FX -4AD
3U
• FX -4AD-ADP
3U
• FX -3A-ADP
3U
FX Series Analog input products
3UC
• FX -4AD
3UC
Other Series Analog input products
• FX -4AD
2NC
• FX -8AD
2N
A-2
PLC User's Manual - Analog Control Edition
3UC
Voltage or
Analog input
current
special function
block, special
expansion board
→ To determine whether or not a unit can be connected to the PLC,
refer to Chapter 3 "System Configuration Drawings of Analog Products."
• FX
• FX
A/D conversion
data
adapter,
→ For detailed description, refer to Section D.
→ For detailed description, refer to Section B.
→ For detailed description, refer to Section C.
→ For detailed description, refer to Section H.
→ For detailed description, refer to Section B.
-4AD
2N
-2AD
2N
→ For a detailed description of the other analog input products,
1.1 Outline and Features of Analog Control
FX /FX /FX /FX
3S 3G 3GC 3U
Series PLC
Check the flux rate using
the PLC.
• FX -5A
2N
• FX -3A
0N
refer to the corresponding manuals.
1 Introduction
/FX
3UC