Toro 74311TE Operator's Manual page 12

With 122cm direct-collect cutting unit
Hide thumbs Also See for 74311TE:
Table of Contents

Advertisement

1. Warning—read the Operator's Manual. Do not operate this
machine unless you are trained. Wear hearing protection.
2. Sliding, tipping hazard. Do not use the machine near drop-offs
with slopes greater than 15 degrees, use the machine a safe
distance from drop-offs on slopes less than 15 degrees; do
not turn sharply while traveling fast, drive slowly when turning.
3. Warning—Do not use dual ramps, use one piece ramps when
transporting machine; Do not use ramps with an inclination
greater than 15 degrees.
4. A rollbar is available; use it for areas where there are slopes,
drop-offs, or water.
Molded into Front of Hopper
5. Warning—Stay away from moving parts; keep all guards in
place. Shut off engine and remove key before adjusting,
servicing, or cleaning.
6. Warning—Disengage the PTO, move the speed control lever
to the neutral position, engage the parking brake, and shut off
the engine before leaving the operator's position.
7. Thrown object hazard—Pick up objects that could be thrown
by the mower. Do not operate when people and pets are in
the area. Keep the deflector in place.
8. Crushing/dismemberment hazard of bystanders—Do not
carry passengers, look forward and down when operating the
machine, and look behind and down when reversing.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master 8000 series

Table of Contents