Electrical System Maintenance; Fuses - Toro 31598 Operator's Manual

Electrical System
Maintenance
WARNING
If installing an auxiliary accessory to the machine,
the only approved locations to source power are
the traction unit fuse block (Figure 68) or the cab
fuse block (Figure 70). A maximum of 10 amps is
available from either location. Contact your local
Toro distributor for assistance.
Note: Make sure the key is off and removed from the
switch before removing fuses.

Fuses

The traction unit fuses (Figure 68) are located in the
power center console (Figure 67).
Figure 65
Figure 66
1. Power center console
1. Fuses
2. Fuses
50
Figure 67
2. Knob
Figure 68
3. Alternate positive post for
jump starting