Toro 31598 Operator's Manual page 25

Alarm (InfoCenter)
The InfoCenter's alarm sounds when:
• an engine fault is received
• an advisory or fault is received from the TEC
controllers
• starting the machine
Info Center
Fault Indicators
Stop -If the driver receives a STOP indication, the driver
should cease operation of the machine and the engine
as quickly and as safely as possible to reduce damage
to the engine (Figure 18).
Check Engine -If the driver receives a Check Engine
indication for a maintenance fault, the driver should take
the machine to a service center as soon as possible.
Figure 18
Fault Example
1. Fault screen
Advisories
Advisories provide the operator additional information
to operate certain functions on the machine (Figure 19).
Advisory Example
1. Advisory screen
To Set Cruise Control
Increase ground speed
To Float Deck
Lower decks
To Lower Deck
1. Operator must be seated
2. Select low range
3. Set parking brake
Electronics Issues
1. Fix High/Low range switch
2. Controller firmware incompatible
3. Blown fuse
4. HHDT ready
Engine
1. Lower engine speed
2. Wait to shutoff engine
25
Figure 19