Setup - Toro 31598 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Operator Training Material
Parts Catalog
Pre-delivery Inspection Sheet
CE Certificate
Production Year Decal
Note: Determine the left and right sides of the machine
from the normal operating position.
Note: Some parts may have already been installed at
the factory.
Description
No parts required
Deck cover R.H.
Deck cover L.H.
V-Belt
No parts required
No parts required
No parts required
No parts required
No parts required
Qty.
–
1
1
2
–
–
–
–
–
Qty.
1
Provide the operator with information on the use and
1
maintenance of the machine
1
1 Ordering parts
1 Inspecting the product before delivering it to the owner.
1 CE certification.
1
Used in conjunction with the CE kit
15
Use
Remove the side deck straps and brace
Lower the front deck winglets
Level the front center deck
Level winglet decks to front center deck
Check the Tire Pressure
Check Fluid Levels
Grease the machine.
Use