Specifications; Operation; Before You Start - Toro 22615 Operator's Manual

Specifications

Note: Specifications and design are subject to change
without notice.
Cutting Depth
Length
Width
Height
Weight

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
30 cm (12 inches)
Important: Before operating, check the fuel and oil
193 cm (76 inches)
level, and remove debris from the machine. Also, ensure
that the area is clear of people and debris. You should
75 cm (29.5 inches)
also know and have marked the locations of all utility
107 cm (42 inches)
lines.
109 Kg (240 lb)

Before you Start

•
•
•
•
•
•
•
8
Dig away the earth and remove any stones near the tree
stump that may interfere with your work. Check that the
ground is free of foreign objects, such as electrical cables,
barbed wire, etc.
Cut or trim the stump using a power saw.
Review all the safety decals on the machine.
Ensure that you are familiar with safety regulations and
shutdown procedures described in this manual.
Ensure that all guards are in place and in good condition.
Ensure that the blades and cutters are in place and in
good condition.
Ensure that the work area, cutter, and stump in particular
are free from metallic objects such as wire, nails, etc. that
could be thrown out and injure persons in the vicinity
and damage the equipment.