Toro 22615 Operator's Manual page 6

1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 6. Explosion hazard; electrical shock hazard—do not dig in areas
3. Thrown object hazard—keep bystanders a safe distance from
the machine.
4. Thrown object hazard—wear eye protection, pick up debris
before operating.
1. Warning, cutting wheel—to adjust the cutting wheel teeth between jobs 1) Loosen the nut; 2) Push the tooth down and rotate it 1/3
of a turn; 3) Tighten the nut to 50 ft-lb; 4) Proceed with grinding.
119-4701
5. Crushing hazard of hand—stay away from moving parts, keep
all guards and shields in place.
with buried utility lines; contact local power organizations
before digging.
7. Warning—remove the ignition key (if applicable) and read the
instructions before servicing or performing maintenance.
132-4004
6