Product Overview; Controls - Toro 22615 Operator's Manual

Product Overview

1. Throttle lever
2. Hour meter
3. Cyclone air filter
4. Choke
5. Fuel valve
6. Sediment cup
7. Starter

Controls

Become familiar with all the controls
before you start the engine and operate the machine.
Throttle Lever
The throttle lever controls engine speed. With the lever down,
in the D position, the engine runs at idle. This is
ISENGAGE
also the starting position. When the engine speed increases,
to the E position, the centrifugal clutch engages and
NGAGED
the cutting wheel rotates.
Figure 3
8. Cutting wheel
9. Belt cover
10. Lift
11. Fuel cap
12. Parking brake
13. Safety bail
14. Handle
(Figure 3 and Figure
1. Throttle—Disengage
position
Parking Brake
The parking brake holds the left wheel from turning to secure
the machine and for easy movement of the machine from side
to side when grinding the stump.
4)
G014632
1. Pull back to engage brake
Hour Meter
When the engine is off, the hour meter displays the number
of hours of operation that have been logged on the machine.
7
Figure 4
2. Throttle—Engaged
position
Figure 5