Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Toro 22615G
Summary of Contents for Toro 22615G
- Page 1 Form No. 3421-245 Rev B SGR-13 Stump Grinder Model No. 22615—Serial No. 402000000 and Up Model No. 22615G—Serial No. 402000000 and Up Model No. 22615HD—Serial No. 402000000 and Up *3421-245* B Register at www.Toro.com. Original Instructions (EN)
- Page 2 There may be buried utility lines in the work additional information, contact an Authorized Service area. Digging into them may cause a shock Dealer or Toro Customer Service and have the model or an explosion. and serial numbers of your product ready.
-
Page 3: Table Of Contents
Safety Improper use or maintenance by the operator or g000502 Figure 2 owner can result in injury. To reduce the potential for injury, comply with these safety instructions 1. Safety-alert symbol and always pay attention to the safety alert symbol , which means: Caution, Warning, or Danger—personal safety instruction. - Page 4 Preparation • Do not operate the machine when you are tired, ill, or under the influence of alcohol or drugs. • Wear appropriate clothing including gloves, eye • Use care when loading or unloading the machine protection, long pants, substantial slip-resistant into a trailer or truck.
-
Page 5: Safety And Instructional Decals
Make any necessary repairs before starting the machine. • Use only genuine Toro replacement parts. Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. - Page 6 decal133-8056 133-8056 decal130-8322 130-8322 1. Use only fuel with an 3. Do not use fuel with an alcohol content by volume alcohol content by volume under 10%. greater than 10%. 2. Read the Operator's Manual for more information on fuel. decal137-4871 137-4871 1.
-
Page 7: Product Overview
Product Overview g014499 Figure 4 1. Throttle—Disengage 2. Throttle—Engaged position position g024550 Figure 3 Parking Brake 1. Throttle lever 8. Cutting wheel The parking brake holds the left wheel from turning to 2. Hour meter 9. Belt cover secure the machine and for easy movement of the 3. -
Page 8: Specifications
Operation Note: Determine the left and right sides of the machine from the normal operating position. Important: Before operating, check the fuel and oil level, and remove debris from the machine. Also, ensure that the area is clear of people and debris. -
Page 9: Adding Fuel
Adding Fuel WARNING Fuel is harmful or fatal if swallowed. Long-term exposure to vapors can cause DANGER serious injury and illness. In certain conditions, fuel is extremely flammable and highly explosive. A fire or • Avoid prolonged breathing of vapors. explosion from fuel can burn you and others •... -
Page 10: Performing Daily Maintenance
Filling the Fuel Tank Starting the Engine Park the machine on a level surface and engage Move the fuel valve to the O position, all the the parking brake. way to the right (Figure Shut off the engine and allow the engine to cool. Clean around the fuel-tank cap and remove it (Figure g015174... -
Page 11: Grinding A Stump
Grinding a Stump DANGER This machine is capable of amputating hands and feet. • Always wear substantial, slip-resistant footwear. • Stay in the operating position while the machine is running, and keep away from moving parts. • Keep all bystanders a safe distance away from the machine. -
Page 12: Lifting The Machine
each sweep, until you have removed the front portion of the stump to ground level (A through D in Figure 11). Raise the cutting wheel, release the parking brake, and move the machine forward a few centimeters (inches). Engage the parking brake. Repeat steps until you have completely removed the stump (E through H in... -
Page 13: Maintenance
Maintenance Note: Determine the left and right sides of the machine from the normal operating position. Important: You can tip the machine backward or on its side to clean or service it, but no longer than 2 minutes. If you hold the machine this position for too long, fuel can drain into the crankcase and damage the engine. -
Page 14: Engine Maintenance
Engine Maintenance Secure the cyclone housing using the 3 screws. Servicing the Air-Cleaner Elements Servicing the Air Cleaner Service Interval: Before each use or daily—Check Removing the Foam and Paper Elements the air filter Park the machine on a level surface and engage Every 50 hours—Service the air filter the parking brake. -
Page 15: Servicing The Engine Oil
Servicing the Engine Oil Servicing the Foam Air-Cleaner Element Wash the foam element using a mild detergent Service Interval: Before each use or daily—Check and water. the engine-oil level. Squeeze it dry with a clean cloth. After the first 20 hours—Change the engine oil. Soak it with new engine oil. - Page 16 Changing the Engine Oil Start the engine and let it run for 5 minutes. Note: This warms the oil so that it drains better. Park the machine on a level surface and engage the parking brake. Shut off the engine and wait for all moving parts g205123 to stop.
-
Page 17: Servicing The Spark Plug
Removing the Spark Plug Park the machine on a level surface and engage the parking brake. Shut off the engine, wait for all moving parts to stop, and allow the engine to cool. Locate and remove the spark plug (Figure 20). -
Page 18: Fuel System Maintenance
Installing the Spark Plug Fuel System Maintenance Cleaning the Sediment Cup Service Interval: Every 100 hours Yearly or before storage Underneath the fuel valve is a sediment cup to catch dirt in the fuel. Park the machine on a level surface and engage the parking brake. -
Page 19: Cooling System Maintenance
Brake Maintenance Cooling System Maintenance Adjusting the Parking Brake Cleaning the Engine Screen Park the machine on a level surface and engage Service Interval: Before each use or daily the parking brake. Before each use, remove any buildup of grass, Shut off the engine and wait for all moving parts dirt, or other debris from the engine screen. -
Page 20: Belt Maintenance
Belt Maintenance Adjusting the Drive-Belt Tension Service Interval: Before each use or daily Note: Inspect the drive belt through the slot on top of the belt cover. Adjust as required. Park the machine on a level surface and engage g242386 the parking brake. -
Page 21: Replacing The Drive Belt
Replacing the Drive Belt Service Interval: Every 100 hours Note: Replace the belt if it shows any signs of wear, cracks, glazing, or damage. Park the machine on a level surface and engage the parking brake. Shut off the engine and wait for all moving parts to stop. -
Page 22: Grinder Maintenance
Grinder Maintenance Replacing the Teeth Service Interval: Before each use or daily—Check the condition of the teeth; rotate or replace any that are worn or damaged and torque the nuts for all teeth. Due to the high amount of wear placed on the teeth, you need to rotate and replace them periodically (Figure 29). -
Page 23: Cleaning
Cleaning Removing Debris from the Machine Regular cleaning and washing increases the life span of the machine. Clean the machine directly after use, before the dirt hardens. Before cleaning, check that the fuel-tank cap is properly in place to avoid getting water in the tank. Use care when using a high-pressure sprayer, because it can damage warning decals, instruction signs, and the engine... -
Page 24: Storage
Storage Paint all scratched or bare metal surfaces. Paint is available from your Authorized Service Dealer. Store the machine in a clean, dry garage or For storage over 30 days, prepare the machine as storage area. follows: Cover the machine to protect it and keep it clean. Remove dirt and grime from the external parts of the entire unit, especially the engine. -
Page 25: Troubleshooting
Troubleshooting Problem Possible Cause Corrective Action The engine does not start. 1. The safety bail is in the O position. 1. Hold the safety bail against the handle. 2. If your model is equipped with an 2. Move the switch to the O position. - Page 26 Notes:...
- Page 27 Notes:...
- Page 28 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.