Product Overview
1. Reverse safety
4. Battery
plate
2. Control panel
5. Tie-down/lift
3. Engine
6. Parking-brake
Controls
Become familiar with all the controls
you start the engine and operate the machine.
Figure 4
7. Track
8. Chip shield
point
9. Grinder
lever
(machines with
CE kit only)
(Figure
5) before
Control Panel
1. Key switch
g018769
2. Throttle lever
3. Choke lever
4. Hour meter
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease the engine speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke
to keep the engine running smoothly. As soon as
possible, move the choke lever all the way rearward.
Note:
A warm engine requires little or no choking.
Hour Meter
The hour meter displays the number of hours of
operation that have been logged on the machine.
9
Figure 5
5. Traction control
6. Reference bar
7. Grinder
control/hydraulic-lift lever
, R
, and S
. Refer to
FF
UN
TART
15).
g025098