The Paper Is Too Small; Paprwidth Mismatch - Canon iPF6400S User Manual

iPF6400S
Cause
When Detect Mismatch in the Control Panel
menu is set to Pause, the type of paper loaded
does not match the type specified in the printer
driver.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper loaded
does not match the type specified in the printer
driver.

The paper is too small.

The paper is too small.
Cause
When Detect Mismatch in the Control Panel
menu is set to Pause, paper smaller than the
size specified in the printer driver is loaded.
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than the
size specified in the printer driver is loaded.
The paper is too small. The paper is too small.
A sheet has come out of the printer during printing.
The loaded paper is too small.
(When you have attempted to print a test print sheet or other
printer status information.)

PaprWidth Mismatch

PaprWidth Mismatch
Cause
When Detect Mismatch in the Control Panel menu is set
to Pause or Hold Job, the width of the loaded roll does
not match the width specified in Fit Roll Paper Width in
the printer driver.
User's Guide
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
You can continue to print, but note that this error may cause paper jams or problems
in the printing results.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the printer
as follows.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Change the paper size setting in the printer driver to the size loaded in the printer
and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the print-
er driver as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop print-
ing.
2.
Replace the loaded paper to match the settings in the printer driver and try printing
again.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
You can continue to print, but note that this error may cause problems in the printing
results.
Cause
Corrective Action
Corrective Action
1.
Press the OK button and remove the sheet.
2.
Confirm the paper size and setting.
3.
Reload the paper.
(See "Loading Sheets in the Feed Slot.")
Replace the roll with a roll 10 inches in width or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace the roll with a roll 10 inches wide or larger.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to resume print-
ing.
The paper is too small.
P.22
➔
P.25
➔
P.22
➔
P.25
➔
Corrective Action
P.495
➔
P.478
➔
P.480
➔
P.471
➔
P.473
➔
903