Paper Jam; Paper Loaded Askew; Paper Not Aligned With Right Guide; Cannot Detect Papr - Canon iPF6400S User Manual

iPF6400S

Paper jam.

Paper jam.
Cause
A paper jam oc-
1. For roll paper, cut the paper on the upper side of the {Paper Feed Slot.
curred in the
2. Press the OK button.
printer during
printing. 3.
Remove the jammed paper.
(See "Clearing Jammed Paper (Paper Feed Slot).")
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
4. Load the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.

Paper loaded askew.

Paper loaded askew.
Paper loaded crooked was detected when the paper was advanced.
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may
Important
be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is
printed.

Paper not aligned with right guide.

Paper not aligned with right guide.
Skew Check Lv. on the Control Panel menu is set to something other than Off and
the paper is not aligned with the guide on the right during loading.

Cannot detect papr

Cannot detect papr
Cause
The printer could not detect the paper.
User's Guide
P.870
➔
P.473
➔
P.495
➔
Cause
Cause
Corrective Action
Reload the paper as follows.
1.
Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")
(See "Loading Rolls in the Printer.")
Corrective Action
P.875
➔
P.873
➔
Press the OK button and reload the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed
Slot.")
P.495
➔
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the print-
er.
(See "Loading Rolls on the Roll Hold-
er.")
P.471
➔
Reload the paper as follows.
1.
Press the OK button to clear the error.
2.
Reload the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
P.495
➔
P.473
➔
Paper jam.
Corrective Action
P.473
➔
Corrective Action
P.473
➔
P.495
➔
907