The Paper Is Too Small - Canon iPF6300 User Manual

Error Message >
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.
When Detect Mismatch in the Control
Panel menu is set to Warning, the type
of paper loaded does not match the type
specified in the printer driver.

The paper is too small.

When Detect Mismatch in the Control Pan-
el menu is set to Pause, paper smaller than
the size specified in the printer driver is loa-
ded.
12
912
When Detect Mismatch in the Control Pan-
el menu is set to Warning, paper smaller
than the size specified in the printer driver is
loaded.
The paper is too small.
Messages regarding paper >
Cause
Cause
Corrective Action
2. Replace the loaded paper with paper of the type and size you have
specified in the printer driver.
The printer will resume printing.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Follow these steps to ensure the paper type matches on the printer and
in the printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK but-
ton.
2.
Either change the type of paper specified in the printer driver set-
tings or replace the loaded paper and change the paper type setting
on the printer.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the print-
ing quality.
You can continue to print, but note that this error may cause problems
in the printing results.
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to re-
sume printing.
However, note that this error may cause paper jams and affect the
printing quality.
Adjust the paper size setting in the printer driver to match the size
loaded in the printer as follows.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
2. Change the paper size setting in the printer driver to the size loa-
ded in the printer and try printing again.
Replace the loaded paper with paper of a size that matches the size
setting in the printer driver as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK
button to stop printing.
2.
Replace the loaded paper to match the paper width setting in the
printer driver and try printing again.
You can continue to print, but note that this error may cause prob-
lems in the printing results.
→P.3
→P.6
→P.3
→P.6
iPF6300