Canon iPF6400S User Manual page 594

Menu Settings
System
Time Zone
Setup
Length Unit
Detect Mismatch
Paper
Size Ba-
sis
Keep Paper Size
TrimEdge Reload
594
Rep.P.head Print
Setting Item
Roll Selection 1
Roll Selection 2
Description, Instructions
Specify the time zone. Time zone options indicate a main city
in this time zone and the difference from Greenwich Mean
Time.
Choose the display unit for length. Change the unit displayed
for the remaining amount of roll paper, Tot.Print Area, and
so on.
Specify printing behavior if the type and size of paper speci-
fied in the printer menu does not match the type and size in
the printer driver.
Choose Pause to have printing paused under these circum-
stances. Choose Warning to continue printing after notifica-
tion. Choose None to continue printing without notification.
Choose Hold Job to store jobs with mismatched types and
sizes of paper on the printer hard disk, in a print queue await-
ing processing. (See "Using the Printer Hard
Disk.")
P.666
➔
If roll size detection is activated, choose whether ISO A3
(297mm) or 300mm Roll is applied when a roll of an inter-
mediate width is detected.
If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll of an in-
termediate width is detected.
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of the
printer driver if the latter is smaller, which may prevent text or
images in the margin from being printed.
Choose Off to give priority to margin settings. The larger val-
ue is used if the margin specified in the printer driver does
not match the margin in the printer menu.
Specify whether to trim the leading edge of the currently re-
tracted roll when the roll is advanced. Cut the edge if you are
concerned about any marks left on the roll when the roll is
left in the retracted position.
Specify On to have rolls cut when printing begins after Sleep
mode or when the power is restored. Selecting Automatic
will trim the edge when the roll has been in the retracted po-
sition for two days or more.
Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.")
P.708
➔
iPF6400S
User's Guide