Canon iPF6400S User Manual page 327

iPF6400S
E
Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is
held firmly against the Platen.
• F
Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
Setting Item
Printer Default
3 mm (0.12 in)
20 mm (0.8 in)
G
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automat-
ic cutting is used.
Setting Item
Printer Default
High Speed
Standard
Low Speed
H
Automatic Cutting
Set whether to perform roll cutting automatically or print a cut line.
The following settings are available for automatic cutting.
Setting Item
Printer Default
None
Print Cut Guideline
I
Calibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
Setting Item
Printer Default
Enabled
Disabled
J
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image
with the left and right sides inverted.
K
Extend print pass
Uneven printing that occurs when printing with Highest selected in Print Quality may be improved in some cases
by selecting this check box. However, this also reduces the printing speed.
User's Guide
The setting of the control panel of the printer is applied.
The document is printed in the standard size.
* Select this when you do not have any problems in printing.
Select this when rubbing against the printhead occurs such as when using paper that tends to
curl.
The setting of the control panel of the printer is applied.
When the Standard setting does not result in a clean cut surface, select this.
Select this when you do not have any problems in automatic cutting.
This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select
it when using adhesive paper.
The setting of the control panel of the printer is applied.
After printing completes, the roll is not cut per page, and the next page of data is printed suc-
cessively.
After printing completes, a line is printed per page, and the next page of data is printed succes-
sively.
The setting of the control panel of the printer is applied.
Print using the calibration results.
Print without using the calibration results. Select this to avoid the changing of the color of im-
ages during printing by color calibration.
Paper Detailed Settings Dialog Box
Details
Details
Details
Details
327