Cannot Calibrate; Excessive Temperature Or Humidity; Please Execute Common Calibration; Please Commn Calibrt Using Above Paper - Canon iPF6400S User Manual

iPF6400S
"Replace with a 16-inch wide or wider roll paper."
The loaded paper is too small.
(When you have attempted to print a test print sheet or other
printer status information.)

Cannot calibrate.

Cannot calibrate.
Cause
The paper for printing a test pattern is soiled.
Otherwise, you have loaded colored paper.
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shining
on the printer and causing the sensor to mal-
function.

Excessive temperature or humidity.

Excessive temperature or humidity.
Cause
The temperature or humidity
where the printer is installed is
out of the acceptable range for
operation.

Please execute common calibration.

Please execute common calibration.
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
•
If Set Exec. Guide is On in the Control Panel menu.
• If the printer is loaded with a type of paper on which color calibration cannot be executed.

Please commn calibrt using above paper.

Please commn calibrt using above paper.
It is now recommended that you execute Common calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the
following is true.
• If the printer is loaded with a type of paper on which color calibration cannot be executed and the prede-
fined conditions since executing the Common calibration the last time have been reached.
•
Although a media type that color calibration can be executed on is loaded in the printer, there is no re-
cord or performing color calibration on that media, and the designated criteria from executing Common
calibration the last time have been reached.
User's Guide
Cause
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
See the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or strong
lighting.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental conditions
are recommended for various types of paper. For details on the recommended environmental conditions,
see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Cause
Cause
Corrective Action
Replace the roll with a roll 16 inches in width or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace the roll with a roll 16 inches wide or larger.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
P.881
➔
Corrective Action
P.464
➔
Execute Common calibration.
(See "Color Calibration Using the Printer
Sensor.")
Set Set Exec. Guide to Off on the Control
Panel menu.
(See "Menu Structure.")
Cannot calibrate.
P.478
➔
P.480
➔
P.471
➔
P.473
➔
P.464
➔
Corrective Action
P.736
➔
P.582
➔
Corrective Action
Execute Common calibra-
tion.
(See "Color Calibration Us-
ing the Printer Sen-
sor.")
P.736
➔
Set Set Exec. Guide to Off
on the Control Panel menu.
(See "Menu Struc-
ture.")
P.582
➔
913