Canon iPF6400S User Manual page 391

Hide thumbs Also See for iPF6400S:

Table of Contents

The following settings are available for paper source.

Manual (3mm margins)

When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become defec-

tive depending on the paper used. If this happens, select another paper source.

Roll Paper Width

This selects the width of the roll media set to the printer.

Available only if rolls are selected in Paper Source.

Automatic Cutting

You can set the printer to cut roll paper automatically or print a guideline for cutting.

The following settings are available for automatic cutting.

Printer Default

Print Cut Guideline

Available only if rolls are selected in Paper Source.

You can input the number of print copies in numerical characters.

The maximum value is 999.

You can change the numbers by clicking either ▲ button or ▼ button.

User's Guide

Select for manual paper feed printing.

Select for manual paper feed printing when you want to minimize the margin at the far end

edge of paper.

Select to print on roll paper.

The value set on the printer operation panel takes priority.

Each page is not cut after it is printed and printing continues without interruption.

A print cut guideline is printed after each page and printing continues without interruption.

Paper Settings Panel

Troubleshooting