Canon iPF6400S User Manual page 592

Menu Settings
Adjust Calibra-
Printer tion
Mainte- Head Cleaning
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head In-
fo
Clean Platen
Interface EOP Timer
Setup
TCP/IP
592
Setting Item
Calibration Log
Use Adj. Value
Set Exec. Guide
Return Defaults
Printhead L
Printhead R
IPv4 IPv4 Mode
Protocol DHCP
BOOTP
RARP
IPv4 IP Address
Settings
Subnet Mask
Default G/W
Description, Instructions
The Date, Paper Type, and Adjustment Type for which col-
or calibration was executed are displayed on the Display
Screen where you can confirm them.
Common calibration and unique calibration are the Adjust-
ment Type of color calibration.
When paper is set in the printer, the history of effective color
calibration for the set paper is displayed.
When paper is not set in the printer, the latest history among
common calibration or unique calibration is displayed.
Also, a hyphen (-) is displayed when there are no execution
results.
(See "Color Calibration Using the Printer Sensor.")
Choose Disabled > OK if you prefer not to apply the color
calibration adjustment value in print jobs. However, printer
driver settings are given priority.
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
given priority.
If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Clear the color calibration adjustment value and the execu-
tion log.
Clean the Printhead. (See "Cleaning the Print-
head.")
P.825
➔
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if print-
ing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Execute when replacing the Printhead. Follow the instruc-
tions displayed to complete the required procedure. (See
"Replacing the Printhead.")
P.826
➔
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Execute when replacing the Maintenance Cartridge. Follow
the instructions displayed to complete the required proce-
dure. (See "Replacing the Maintenance Car-
tridge.")
P.832
➔
Indicates information about the printhead.
Move the Carriage in preparation for cleaning the Platen.
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Specify the protocol used to configure the IP address auto-
matically.
Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
iPF6400S
P.736
➔
User's Guide