Egg Tray; Sliding Body Shelves; Chiller Compartment - Blomberg KFD 9952 XA+ Manual

Hide thumbs Also See for KFD 9952 XA+:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Egg tray

You can install the egg holder to the
desired door or body shelf.
Never store the egg holder in the
freezer compartment

Sliding Body Shelves

Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to
a stop point when pulled towards front
to allow you reach the foods placed at
the back of the shelf; when it is pulled
after slightly lifted upwards at the
second stop point, the body shelf will
be released.
The shelf should be hold tightly from
the bottom as well in order to prevent
it from tipping over. The body shelf is
placed on the rails at the sides of the
refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed
backwards to seat it completely.
1
2
3
4

Chiller compartment

Chiller compartments enable the
foods to be frozen become ready
for freezing. You can also use these
compartments to store your food at a
temperature a few degrees below the
fridge compartment.
You can increase the inner volume of
your refrigerator by removing any of
the chiller compartments. To do this,
pull the compartment towards yourself;
the compartment will lean against the
stopper and stop. This compartment
will be released when you lift it about 1
cm and pull it towards yourself.
22
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kfd 9952 xda+

Table of Contents