Step
3
Wire harness check
1) Disconnect connector from keyless start control module.
2) Check for open, short and high resistance in related door
request switch circuit.
Is each circuit in good condition?
Antennas and Request Switches Removal and Installation
Remove and install antennas and request switches referring to the following figures.
[A]
[B]
[C]
3
[A]: Front door antenna and request switch (included in outside
door handle assembly)
[B]: Rear end door opener and request switch assembly
[C]: Rear end door antenna
[D]: Center antenna
[E]: Luggage room antenna
Action
Repair Instructions
1
2
1. Outside handle assembly
2. Rear end opener and request switch
3. Rear bumper
4. Parking brake lever
5. Tail end member trim
Yes
Substitute a known-
good keyless start
control module and
recheck.
[D]
[E]
: Antenna and request switch can not be removed from outside door handle assembly
Keyless Start System:
No
Repair circuit.
S6RW0CA506001
4
5
I5RW0AA50014-01
10E-27