Table of Contents
Advertisement
10.4.2 PV Connector
The PV connector can be replaced when it is damaged. The PV connector used in the 3.6
kWh All In One system consists of a PV stick with male/female parts manufactured by Multi-
Contact AG c/o Stäubli Group.
10.4.3 FAN 1 & FAN 2
In the All in One System, FAN1 and FAN2 provide air circulation to maintain and regulate the
system temperature. The fans can be replaced when they reach the end of their operational
life span or fail to work properly. If that is the case, the installer or the maintenance
personnel will identify its cause of malfunction and will replace it. The replacement method
may depend on the local maintenance conditions. The manufacturer's name and the model
number of the fan are as follows: Minebia Manufacturing Company/DC FAN MOTOR/4710KL-
04W-B59-E00. For further details, please refer to the Maintenance Manual or contact
SAMSUNG SDI Service. The contact address is described in Chapter 13.
Australia (Eng.) 05/2015. Rev1.1
[Figure 10-5: PV Connector (MC4)]
10. Maintenance
87
Advertisement
Table of Contents
