Table of Contents
Advertisement
4. Installation
4.1.4 Position (Location Selection)
As shown in the [Figure 4-3], install the device on a flat surface. (Front, back, left, right
gradient within ±0.5°)
To allow for natural ventilation, the side of the system must be kept away from the wall
about 0.3m at least. Make sure not to have foreign substances and objects stuck in the
blowing fan, ventilation entrance and exit sides.
16
[Figure 4-2: Minimum Clearance for All in One]
[Figure 4-3: Restriction for the surface gradient]
Australia (Eng.) 05/2015. Rev1.1
Advertisement
Table of Contents
