7. Entering Initial Installation
Information
You can use the following procedure to enter the initial installation information and to
monitor the operational information of this system appropriately on server.
7.1 Information Input Administrator
You have to use a laptop or a smart phone to enter the installation information.
7.2 System Information input stage
1
Step : Direct Connection to PC -> Input Local Setting Value
st
2
nd
Step : Connection to Web Page -> Input Webpage Setting Value
7.3 PC Direct Connection and Local Setting Value
7.3.1 PC Direct Connection Flow
System Off Status → Insert Jumper Wire, Connect PC LAN cable
→ System AC on → PC Direct Connection → Input Setting Value
→ System off → Remove Jumper Wire → Connect Internet LAN Cable
Australia (Eng.) 05/2015. Rev1.1
7. Entering Initial Installation Information
51