Verizon FiOS-G1100 User Manual page 72

ROUTING
IPv6 LAN Configuration (select Stateless from the drop-
•
down list) as shown in drop-down list and page below:
LAN Prefix
•
LAN IPv6 Link Local Address (automatically populated)
•
Router Advertisement Lifetime (minutes between 0-150)
•
Interfaces - check one or more of the box(s) to apply IPv6
•
LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enabled
After entering all appropriate IPv6 settings click Apply to
3.
have changes take effect.
DHCPv6 - WAN IPv6 ADDRESS CONNECTION
The IPv6 WAN DHCPv6 configurations are IPv6 settings that you
enter that will allow your IPv6 connection to be updated by the ISP as
needed.
To configure IPv6 WAN Stateful (DHCPv6) mode, select the
1.
Stateful (DHCPv6) option on the IPv6 Configuration Control
Page as shown below:
Specify the DHCPv6 method to be used to obtain your WAN
2.
IPv6 Address by entering:
IPv6 WAN Configuration (select DHCPv6 from the drop-
•
down list) as shown in drop-down list and page below:
verizon.com/fios
08 / CONFIGURING
ADVANCED SETTINGS
142
©
| 2014 Verizon. All Rights Reserved.