Dvk Tab - microHAM microKEYER Manual

Table of Contents

DVK TAB

microKEYER allows recording and playing nine voice messages per bank and an unlimited number of

banks (limited only by the capacity of the computer hard disk). Banks can be managed with Rename, Add

and Remove buttons. Rename to rename the current bank, Add to create a new bank, and Remove to

delete the current bank. Bank selection is provided by Bank box.

Each memory may repeat with a programmable delay

(loop) or can be chained with another memory using

external keyboard or keypad.

While a DVK message is recorded or played, Router

uses the DVK mixer settings. When recording or

playback is finished, the settings in the Audio Mixer are

restored. DVK mixer settings are not stored with

presets but in the message banks. This means each

bank can have its own levels (slider position). It also

allows each bank to be configured for the voice of a

different operator if microKEYER is used in a club

station or other multi-operator situation. .

DVK memories can be played back using microHAM

Control Protocol if your logging program supports it.

Under Windows 2000 or XP, Router uses the

sound card selected on the Audio Mixer Tab.

With Vista, the input and output sound cards

are selected on the DVK tab.

REC MIC slider adjusts microphone level

during message recording.

TX LEFT (and RIGHT if "Stereo" operation is

selected on the Audio Mixer Tab – Win 2K and

XP only) are separate level controls with same

function as the TX VOICE/DIGIAL controls on

the Audio Mixer tab.

If the "On Air Recording" box is checked, the

microphone signal is automatically forwarded to

the transceiver and PTT activated when a

message is being recorded. On Air Recording

is not available under Windows Vista.

To record, Audio Switching must be set to "CCA." DO NOT use the footswitch or microphone PTT when

recording – even with On Air Recording.

Table of Contents