microHAM microKEYER Manual page 49

APPENDIX B – APPLE OS 10 INSTALLATION
1) To Install microKEYER in Apple OS 10 prepare the microKEYER as for your radio as shown on
Page 9.
2) The proper USB drivers have been
shipped with OS-X since version 10.5
(Leopard). OS-X should load the
proper driver automatically when you
connect the USB cable.
3) If your version of OS-X is missing the
driver, copy the FTDI USB Driver disk
image (.dmg) to your desktop by
clicking on the "Install microHAM Port
Driver for Macintosh OS 10.0 – 10.39"
or "Install microHAM Port Driver for
Macintosh OS 10.4+" link from the
supplied CD or download the most
recent driver package from the
microHAM web site:
www.microHAM.com/downloads.html
4) Open the disk image by clicking on it.
5) Run FTDIUSBSerialDriver.pkg by clicking on it and follow the prompts.
6) Plug in the USB cable
7) Turn on the radio or external power supply.
microHAM © 2010 All rights reserved
49