Table of Contents
Advertisement
1. Insert the microHAM CD in your CDROM/DVD
drive and navigate to Drivers/OS-X or use your
web browser to go to
http://www.ftdichip.com/Drivers/VCP.htm and
down load the latest driver image for OS-X.
2. Open FTDIUSBSerialDriver_v2_2_14.dmg by
clicking on it.
3. For OS-X 10.4, 10.5 or 10.6 open
FTDIUSBSerialDriver_10_4_10_5_10_6 and follow
the instructions to install.
4. Plug in the USB cable
5. Turn on the radio or external power supply.
6. Follow the instructions for your software to configure the application to work with
NOTE: To access all the capabilities of microKEYER, your OS-X software must be written to use the
microHAM Keyer Protocol or µH Router by Kok Chen, W7AY.
MICROSOFT WINDOWS (Windows 2000, XP, Vista, & Windows 7) INSTALLATION
3. The Windows setup utility will start and ask into
which folder Router and its supporting files
should be installed. Note: unless you have a
very strong reason to install Router elsewhere,
please accept the default location.
4. When the Router installation is completed, plug
in the USB cable when instructed, click "Finish"
to launch Router for the first time and proceed
microHAM © 2010 All rights reserved
Mac OS X INSTALLATION
Installing microHAM USB Device Router
1. To install Router click on the Install USB
Device Router link on the installation CD or
download the most recent installation package
from the web site:
www.microHAM.com/downloads.html.
2. If you download an updated package, click on
"urouter_release_xx_xx.exe" (xx_xx is version)
to start the installation.
10
micro
KEYER.
Advertisement
Table of Contents
