microHAM microKEYER Manual page 44

Table of Contents

Advertisement

Keyboard
numeric keypad
NUM LOCK
NUM *
ESC
NUM 0
F1-F9
NUM 1 – NUM 9
NUM DEL
NUM /
ALT
PG UP
WPM control
NUM +
UP
S/N mode
PG DN
WPM control
NUM -
DN
S/N mode
HOME
WPM control
NUM
ENTER
ENTER
S/N mode
ENTER
F10
CAPS
LOCK
SPACE
|
0-9 A–Z "#$%&'()*+,-./:;<=>?@\
0-9 A–Z !"$&='(),-./:;?
microHAM © 2010 All rights reserved
Function
start/stop recording of message (recording is indicated by NUM LED)
Tune (can be canceled by keys NUM 0 or ESC, or by the paddle)
playback: stop transmitting (message or any characters in buffer)
recording: abort recording without storing the message
playback: start message playback
recording: set message number
playback: periodically repeat last message (default interval is 1 second,
it can be changed by pressing the number on numeric keypad)
recording: no function
Switch between "speed control mode" and "serial number mode" (serial
number mode is indicated by SCROLL LED, if present)
When held allows setting the serial number
Increase CW speed (step defined by configuration)
Increment number by one without transmitting
Decrease CW speed (step defined by configuration)
Decrement number by one
Reset CW speed to pot (knob) value
Transmit number with optional report and increase number by one
(format defined by configuration)
transmit CR and LF characters
Toggle PTT – alternative to foot switch
Switch among CW, VOICE, FSK and DIGITAL mode
(FSK mode is indicated by CAPS LED, DIGITAL mode by SCROLL
LED, and VOICE mode by both CAPS LED and SCROLL LED
transmit space (if "type ahead" mode is active all buffered characters
are transmitted before this space)
transmit gap (half dit delay time), this character cannot be recorded to
message from keyboard – it may only be entered from router
transmit character, if "CW type ahead" mode is active character is
pushed to type ahead buffer to be transmitted after next space. Note:
some special characters are mapped to standard prosigns (see
WinKey manual)
transmit character, if "FSK type ahead" mode is active character is
pushed to type ahead buffer to be transmitted after next space
44
CW FSK Voice

Advertisement

Table of Contents
loading

Table of Contents