5
System Management Commands
Command Mode
EXEC mode
User Guidelines
The fan and temperature status parameters are available only on devices on which
FAN and/or temperature sensor are installed.
Examples
Example 1 - The following example displays the general environment status of a
device
The temperature status is OK if the temperature sensors status in the device is OK,
and if the temperature of all the device is below the threshold.
switchxxxxxx # show environment all
FAN is OK
TEMPERATURE is OK
Example 2 - The following example displays the general FAN status of a device .
switchxxxxxx # show environment fan
FAN is OK
Example 3 - The following example displays the detailed temperature status of a
device
switchxxxxxx # show environment temperature status
TEMPERATURE is OK
5.14
show version md5
Use the show version md5 EXEC mode command to display external MD5 digest
of firmware.
Syntax
show version md5
106
78-21075-01 Command Line Interface Reference Guide