Logging Console - Cisco 300 Series Cli Manual

20
Syslog Commands
User Guidelines
You can use multiple SYSLOG servers.
Examples
switchxxxxxx(config)# logging host 1.1.1.121
switchxxxxxx(config)# logging host 3000::100/SYSLOG1
20.3

logging console

Use the logging console Global Configuration mode command to limit messages
logged to the console to messages to a specific severity level. Use the no form of
this command to restore the default.
Syntax
level
logging console
no logging console
Parameters
level—Specifies the severity level of logged messages displayed on the console.
The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
Default Configuration
Informational.
Command Mode
Global Configuration mode
Example
The following example limits logging messages displayed on the console to
messages with severity level errors.
switchxxxxxx(config)# logging console errors
290 78-21075-01 Command Line Interface Reference Guide