Show Class-Map; Match - Cisco 300 Series Cli Manual

Quality of Service (QoS) Commands
78-21075-01 Command Line Interface Reference Guide
49.5

show class-map

The show class-map EXEC mode command displays all class maps when QoS is
in advanced mode.
Syntax
class-map-name
show class-map [
Parameters
class-map-name—Specifies the name of the class map to be displayed.
Command Mode
EXEC mode
Example
The following example displays the class map for Class1.
switchxxxxxx#
show class-map
Class Map match-any class1 (id4)
Match IP dscp 11 21
49.6

match

Use the match Class-map Configuration mode command to bind the ACLs that
belong to the class-map being configured. Use the no form of this command to
delete the ACLs.
This command is available only when the device is in QoS advanced mode.
Syntax
match access-group
no match access-group
Parameters
acl-name—Specifies the MAC or IP ACL name.
]
class1
acl-name
acl-name
49
799