Show Sntp Status - Cisco 300 Series Cli Manual

7
150
Command Mode
Privileged EXEC mode
Example
The following example displays the device's current SNTP configuration.
switchxxxxxx# show sntp configuration
SNTP port : 123 .
Polling interval: 1024 seconds.
MD5 authentication keys
-----------------------------------
2 John123
3 Alice456
-----------------------------------
Authentication is not required for synchronization.
No trusted keys.
Unicast Clients: Enabled
Unicast Clients Polling: Enabled
Server Polling
------------ -------
1.1.1.121 Disabled
Broadcast Clients: disabled
Anycast Clients: disabled
No Broadcast Interfaces.
switchxxxxxx#
7.18

show sntp status

The show sntp status Privileged EXEC mode command displays the SNTP servers
status.
Encryption Key
--------------
Disabled
78-21075-01 Command Line Interface Reference Guide
Clock Commands