Show Ip Igmp Snooping Mrouter - Cisco 300 Series Cli Manual

IGMP Snooping Commands
78-21075-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Example
The following example enables IGMP snooping immediate-leave feature on VLAN
1.
switchxxxxxx(config)#

38.18 show ip igmp snooping mrouter

The show ip igmp snooping mrouter EXEC mode command displays information
on dynamically learned Multicast router interfaces for all VLANs or for a specific
VLAN.
Syntax
show ip igmp snooping mrouter
Parameters
interface vlan-id —Specifies the VLAN ID.
Command Mode
EXEC mode
Example
The following example displays information on dynamically learned Multicast
router interfaces for VLAN 1000.
switchxxxxxx#
show ip igmp snooping mrouter interface
VLAN Dynamic
---- ------
1000 gi1
ip igmp snooping vlan 1 immediate-leave
[ interface vlan-id
Static Forbidden
------- ---------
3-23
gi2 gi
]
1000
38
649