Raid Configuration Setting Procedure - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Appendix D Basic Setting Examples
D.1 Settings When Using Volumes
*3:
D.1.1

RAID Configuration Setting Procedure

(1) Creating RAID groups
An example of creating a RAID group is shown below. For more details, refer to
Management" (page
Procedure
1
Specify 004 and 005 for the disk drive numbers, and create a RAID group that is named r1 (RAID1).
CLI> create raid-group -name r1 -level 1 -disks 004,005
(2) Creating volumes
An example of creating volumes is shown below. For more details, refer to
(page 144).
Procedure
1
Create volumes "v0", "v1", and "v2" in RAID group "r1".
CLI> create volume -name v -count 3 -rg-name r1 -type standard
LUN group
A LUN group is a group of LUNs mapped with volumes that are accessed from the same host group and
port group. This group is referred to as an "affinity group" with older ETERNUS Disk storage systems.
111).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
740
"3.3 RAID Group
End of procedure
"3.4 Volume Management"
-size 512mb
End of procedure
P2X0-1030-09ENZ0