Fujitsu ETERNUS DX80 S2 Cli User's Manual page 404

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show advanced-copy-sessions
When details are displayed:
# SID Gene-
# ration
# 3 - EC
A B
Source Block Address (LBA)
M
Destination Block Address (LBA): 0x1234567890123456
N
Total Data Size(MB)
O
Copied Data Size(MB)
P
Modified Data Size(MB)
Q
SDP Used Capacity(MB)
R
SDP-ID (assigned to SDV)
S
Direction
T
Sync
U
Transfer Mode
V
Recovery Mode
W
Split Mode
X
Remote Session-ID
Y
Remote Box-ID
Z
Time Stamp
a
Elapsed Time
b
Resolution
c
License
d
Copy Range
e
Secondary Access Permission
f
Concurrent Suspend Status
g
Change Error
h
Remain Time
i
A to L: Refer to the above information when a list is displayed.
M: The copy source Start Logical Block Address (LBA) in the specified range is displayed in 16-digit hexadecimal.
N: The copy destination Start LBA in the specified range is displayed in 16-digit hexadecimal.
O: Total Data Size is displayed.
P: Copied Data Size is displayed.
Q: Modified Data Size is displayed.
R: Used Snap data pool capacity is displayed when the type SnapOPC or SnapOPC+ is selected.
S: Snap data pool ID that is assigned to SDV is displayed when the type SnapOPC or SnapOPC+ is selected.
T: In the relevant copy session, the direction of the copy is displayed when the type REC is selected (Primary: copy
source, Secondary: copy destination).
U: Operation mode of the session is displayed.
Sync: Synchronous Operation Mode
Async: Asynchronous Operation Mode
V: Transfer mode of the session is displayed. Details are as follows:
Through Mode: Asynchronous Through Mode
Stack Mode: Asynchronous Stack Mode
Consistency Mode: Asynchronous Consistency Mode
W: The recovery mode of the session is displayed only when the type REC is selected.
Automatic: A mode to restart copying automatically when the REC copy path has recovered from abnormal
status.
Manual: A mode not to restart copying automatically when the REC copy path has recovered from abnormal
status.
Type Volume Source Volume
Type No. Name
Standard 8004 VOLUME001
C D E F
: 0x1234567890123456
: 1024
: 512
: -
: -
: -
: -
: -
: -
: -
: -
: -
: -
: 2010-11-17 18:30:00
: 1 day 1 hour 32 min 35 sec
: x2
: Regular
: Extent
: No Read/Write
: Normal
: Normal
: 1 day 1 hour 32 min 35 sec
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Destination Volume Status
No. Name
4004 VOLUME002 Active
G H I
404
Phase Error Requestor
Code
Equivalent 0x00 GUI
J K L
P2X0-1030-09ENZ0