Fujitsu ETERNUS DX80 S2 Cli User's Manual page 133

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > create eco-schedule
-event-from This parameter specifies that the ECO schedule will apply to a specific starting time. The format
-event-to
■ Example(s)
The following example creates an ECO schedule. The ECO schedule name is "SC001". The ECO schedule will
apply every day from 06:00 to 18:00:
CLI> create eco-schedule -name SC001 -event-type every-day -event-from 0600 -event-to 1800
is "hhmm". "hh" is the starting hour (00 – 23) and "mm" is the starting minute (00 or 30).
A disk motor will power ON at the time specified by this parameter.
This parameter specifies that the ECO schedule will end at a specific time. The format is
"hhmm". "hh" is the ending hour (00 – 23) and "mm" is the ending minute (00 or 30).
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
133
P2X0-1030-09ENZ0