Fujitsu ETERNUS DX80 S2 Cli User's Manual page 61

Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
For FCLINK, OCLINK, and RFCF-RA information, the following information is displayed:
CM#0 Port#0 Information
Port Type
Status/Status Code
CM#0 Port#1 Information
Port Type
Status/Status Code
CM#1 Port#0 Information
Port Type
Port Mode
Status/Status Code
For SCU Information, the following information is displayed:
SCU Information
SCU#0 Status/Status Code
SCU#0 Voltage
SCU#0 Expires
SCU#0 Parts Number
SCU#0 Serial Number
SCU#0 Hard Revision
SCU#1 Status/Status Code
SCU#1 Voltage
SCU#1 Expires
SCU#1 Parts Number
SCU#1 Serial Number
SCU#1 Hard Revision
The following example displays the status of PSU#0:
CLI> show fru-ce -type psu0
CE PSU#0 Information
Status/Status Code
[FCLINK]
[Normal / 0xE001]
[OCLINK]
[Normal / 0xE001]
[FC]
[RFCF-RA]
[Normal / 0xE001]
[Normal / 0xE001]
[9.40V]
[0-00]
[]
[]
[]
[Normal / 0xE001]
[9.40V]
[0-00]
[]
[]
[]
[Normal / 0xE001]
61
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0