Fujitsu Eternus DX80 S2 Instal Setup
Hide thumbs
Also See for Eternus DX80 S2:
- Cli user's manual (756 pages) ,
- User manual (186 pages) ,
- User's manual & installation instructions (147 pages)
Related Manuals for Fujitsu Eternus DX80 S2
Summary of Contents for Fujitsu Eternus DX80 S2
-
Page 1: Initial Setup
ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Initial Setup Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011... - Page 2 Connect FST to DX400 S2 Initial Configuration of the FST Initial Configuration Web GUI Initial Wizard System Setup Initial Manual Setup Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
-
Page 3: Connect Fst To Dx80 S2 / Dx90 S2
"MNT" at the Controller Module • The "Master LED" of the respective CM lights in green Master LED MNT Port Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011... -
Page 4: Connect Fst To Dx400 S2
Both ports can be used for Field Engineer as well as for customer administration tasks Master LED FST Port MNT Port Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011... -
Page 5: Initial Configuration Of The Fst
JavaScript and Style Sheet must be enabled for the browser The default IP address of the ETERNUS Manager GUI • http://192.168.1.1/ Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011... -
Page 6: Initial Configuration Web Gui
To start the installation procedure, logon to the ETERNUS DX S2 Web GUI using the standard User Account User name: root Password: root Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011... - Page 7 ETERNUS DX S2 Web GUI Status overview Global overview about of the system configured disk capacity Global System information Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 8 Abnormal status is detected at power off, the system has not started up normally Error during restoration of the operating environment at power- The system is abnormal Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 9 A component is installed but unused Orange Component is under maintenance (self test) Yellow Preventive maintenance is required Component failure is detected Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 10 Feature registration • Thin Provisioning, Advanced Copy and SED Authentication key Set Network Environment and log out to activate the settings Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 11 SNMP • Agent Basics, Manager, Agent User, Agent Community, Agent Trap Notification • e-Mail and syslog Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 12 Initial Manual Setup - Date and Time "System" "System Settings" Time, Date and time zone Daylight Saving Time NTP server Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 13 A self-explanatory name for the ETERNUS DX system A description of the location of the ETERNUS DX installation Contact information of the administrator Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 14 The user account "f.ce" has per default only the permission to change its own password • Helps in situations with forgotten passwords Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 15 Defines all servers that are allowed to access the LAN port of the ETERNUS DX S2 system • Either Host IP Address and Netmask • Or Network Segment Address and Netmask Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 16 "MNT is available in DX S2 systems "FST" is available in DX400 S2 systems only "RMT" is used at Fujitsu site only Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 17 Setup E-Mail Notification window can be used to define Email notification services Email server settings Email retries Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 18 Also any other error collection program that supports the standard syslog protocol can be used • For example Microsoft Operations Manager (MOM) Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...
- Page 19 SNMP is disabled by default SNMP must be enabled for the other SNMP settings to appear in bold under the "Action" column Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011...